Antaira Technologies is a global leading developer and manufacturer of industrial networking devices and communication solutions for harsh environment applications and is proud to announce the expansion of its industrial networking infrastructure family with the introduction of the LMP-1802G-SFP and LMX-1802G-SFP Series. Antaira’s LMP-1802G-SFP and LMX-1802G-SFP series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water/wastewater treatment plants, oil/gas/mining, and transportation. These devices support high-density Ethernet port connectivity, wide bandwidth, long-distance data transmission, and have a superb reliability factor. 

Terex Utilities has updated the monitor display for the Terex Load Alert system. Load Alert monitors and analyzes the truck’s jib and platform capacity and boom positions on Terex aerial devices. It provides visible and audible alerts when an overload is detected. Load Alert monitors boom angle, platform and jib capacity, winch line distance from the platform pivot point, and winch line load. Included in the display is a full load chart in addition to the printed load chart to help operators stay within the operating limits of the aerial device. The initial screen indicates that the system is operational and, during operations, now turns red if an overload is detected and displays “overload” on the screen. A dial read-out shows the percentage of overload for either the platform or the jib or both. In addition, an alert sounds in the platform and at ground level. 

AEMC’s compact AC Current Probes Model LM102 (current) and LM103 (voltage) are equipped with high-performance magnetic material offering excellent linearity and improved performance. They are ideal current measurement tools for use with multimeters, data loggers and power analyzers. They are designed to meet the most stringent demands in the electrical contracting industry. They also meet the latest IEC safety and performance standards. The probes allow meters to measure AC currents in low-power secondary or industrial applications. Their increased 0.63” (16 mm) clamping diameter easily accommodates most conductors allowing AC current to be measured, recorded and/or displayed on recording or measurement instruments. 

Golight Inc., a leader in pan-and-tilt remote-controlled lighting technology, introduces its new and improved Stryker ST Series of remote-control LED and halogen searchlights. The Stryker ST Series is the culmination of continuous field studies and voice-of-the-customer research that identified desired functional enhancements across the company’s broad land and marine markets. The Stryker ST’s newly designed remote-control unit is as simple to operate as it is intelligent. Large buttons are easy to access even with gloved hands, and fluorescent iconography makes the controller buttons legible in dark or low-light conditions. Now powered by two regular AAA batteries, the controller is more convenient to maintain. 

Megger now offers a single, handheld dedicated static motor tester that can perform multiple tests. Its multifunction capabilities include insulation resistance tester, motor rotation testers, DLRO, multimeters and LCR meter. The MTR105 combines all of the functions frequently used when testing electric motors. This new tester, designed for use in the service, OEM, utility, industrial and transport markets, takes the testing abilities of Megger’s proven insulation resistance test instruments and adds in the DLRO four-wire Kelvin low resistance test, inductance and capacitance tests to provide operators with a versatile unit. The MTR105 is a compact, multi-function test set that is lightweight and easy-to-use. It features a fully automated three-phase connection so that testing can be performed seamlessly with no need to reconnect the unit for each phase-to-phase measurement. It also features temperature correction for insulation resistance testing.  

Superior Signals Inc. adds a new LED search light to its already extensive product offering of LED worklights. The 80WRC series LED search light, with its ability to rotate horizontally 360°, is perfect for those odd jobs where the standard mounted worklight or search light just doesn’t cut it. This light is controlled by a remote, making it easier to operate while you are working. The 80WRC series LED search light is available in white or black and each color option has the choice of flood or spot beam patterns. This 80-watt light has 16 LEDs, gives a light output of 3,145 lumens, a 12–24 voltage range and comes with a 3-year limited warranty. It also has the following certifications: CE, RoHS and IP65, the remote controls are IP67 certified.  

Optronics International introduces a new family of LED warning and beacon lamps. The lamps employ a solid-state, surface-mount device (SMD) design that protects electronics against moisture, shock and vibration. An industry first, these warning and beacon lamps come with Optronics’ exclusive no-hassle, one-diode lifetime warranty protection, which will replace any lamp if even one diode fails. The new lamps meet Class 1 and CA Title 13 requirements. The lamps also meet their respective Society of Automotive Engineers (SAE) standards: SAE J595 governs directional flashing optical warning devices and SAE J845 governs omnidirectional optical warning devices. As Class 1 optical warning devices, these lamps are for use on a wide variety of authorized vehicles to alert pedestrians and motorists of potential hazards relating to the presence of utility trucks, wreckers and many other types of work trucks. 

Fecon has launched a family of stout deck mulcher attachments that are wider than conventional deck mulchers, providing more productivity per pass even in the most demanding environments. Ruggedness and dependability are built in, with attention to detailed design to enhance performance, service life, and safety. A robust bearing carrier houses a heavy-duty bearing with an oversized shaft. Specially designed two-sided blades effectively double their service life without having to flip the blade. A stump-jumper feature allows the Deck Mulcher to ride over stumps without risking bolt shearing; the extra blade mass also increases cutting inertia and enhances performance in thicker materials. The Deck Mulchers can mulch smaller materials faster than traditional drum mulchers, making them ideal for right-of-way clearing and maintenance projects, forestry clearing, site preparation, land improvement, highway mulching and maintenance, urban interface, and more.  

Klein Tools, for professionals since 1857, reintroduces the traditional canvas tool bags in all black for a classic look to take to and from the job. Built with the same heavy-duty No. 8 canvas as existing Canvas Tool Bags, the Klein Tools Deluxe Black Canvas Tool Bags offer the durability tradespeople have come to rely on in an all-new design. The new line features 13 interior pockets for easy tool organization with a detachable shoulder strap that can be adjusted for an ideal fit. It’s also stitched with riveted leather handles for extra comfort and strength with a moisture-resistant vinyl bottom and non-scratch studs on base protect against wear. The updated product line is available in two sizes: 16” (Cat. No. 510216SPBLK) and 18” (Cat. No. 510218SPBLK) and are available in Klein’s Signature Series, offering customized embroidery up to 15 characters. 

Platinum Tools® announces the launch of the new ezEX®38 RJ45 connector. Available as both shielded and unshielded, the ezEX38 RJ45 connector is designed for smaller insulation diameters typically found in Cat5e and smaller Cat6 cabling. The ezEX®38 features the same unique integrated patented Hi-Lo stagger load bar, allowing the conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat5e and smaller Cat6 cabling. The compatible crimping tool is the EXO Crimp Frame® and EXO-EX Die™ (100061C). 

The MS-426 Mid Span Slit & Ring Tool from Jonard Tools works with cables from 5.8 mm in diameter to 12 mm and is patented to provide easy access into Prysmian ESMF Optical Mini FlexTube® cables, and other similarly sized cables. This tool slits and rings thin-walled jackets easily without damaging the buffer tubes inside and has 4 precision slitting and ringing grooves from 5.8 mm to 12 mm (0.23”–0.47”). Each blade in the tool can be used up to 5,000 times and replacement blades can be purchased separately with part number MS-426RB. 

Milwaukee Tool kicks off its tenth season of Heated Gear with its latest introduction of a brand-new category of Milwaukee gear: the M12™ Heated AXIS™ Layering System. This system offers users the versatility to pair the M12™ Heated AXIS™ Jacket with either a HYDROBREAK™ Rain Shell or GRIDIRON™ Work Shell.  

Fiber optic cable blowers from TT Technologies are ideal for last mile, fiber-to-the-home projects. Three models of fiber optic cable blowers are available for installing fiber optic cable, as well as micro-duct. Fiber blowers offer safe, fast and efficient installation of fiber cable into duct work with speeds up to 325 feet per minute possible depending on cable size and duct integrity. The Multiflow cable blower is capable of installing multiple micro ducts or single large size cables into ducts from 1 1/4 in. to 2 in. (32 mm to 50 mm) in diameter. The Miniflow cable blower is capable of blowing in fiber optic cables from 3/16 in. to 7/16 in. (4 mm to 11 mm) into ducts from 1/4 in. to 3/4 in. (7 mm to 20 mm) in diameter. Finally, the Microflow touch blower is able to blow in small fiber optic cables from 1/32 in. to 1/4 in. (1 mm to 5 mm) in diameter. 

Slabach Enterprises, a manufacturer which stocks a large diverse line of reel trailer solutions, offers a new multiple reel trailer available for those who need to transport larger reels. The model I-MR110X2 was created to carry two reels, up to 10 feet in size, to meet the demands for those invested in larger HDPE product installations. 

Robinson Enclosures has the unique ability to provide its customers with comprehensive turnkey solutions for even the most complex structural and acoustic projects or specifications. The company handles all facets of the project in-house, from mechanical and electrical engineering to fabrication and packaging, which controls quality, lead times, and the bottom line.  

Bigfoot Construction Equipment, an American family manufacturer that specializes in outrigger pads, offers standard, custom and premium outrigger pads to maximize compressive loads. Outrigger pads are built in different sizes in length, width and thickness as well as shapes and materials. There are pros and cons to shapes, the larger square outrigger pads have a larger surface area of contact, but they are not as easy to move around on the jobsite as the round outrigger pads, which can usually be rolled by 1 person into position but have less area of contact. The premium birch with which Bigfoot builds wooden outrigger pads has been used since 1991. Birch has been put to the test with some of the largest equipment and in the harshest field conditions. Bigfoot also manufactures two different crane pad racks that mount on the back of cranes to store its composite or wood outrigger pads. This clears up deck space and helps with lifting the outrigger pads on and off the crane’s deck. 

Youngstown’s 16” Lineman Bag is designed to carry rubber insulating gloves, leather protectors and work gloves. The super-duty, 20-oz., water-resistant canvas bag features two covered main storage pockets and a side pocket for securely storing the daily glove inspection tool. Reinforced leather handles are attached to easy-to-open Velcro flaps. Both main compartments feature brass grommets for added ventilation. The bag is finished with a heavy-duty 360 locking carabiner.  

Petzl’s new and improved line of helmets expands on the industry standard of personal protective equipment by offering new colors, updated features, and a wide range of accessories to better address the continually evolving needs of the work-at-height industry. The VERTEX helmet is designed with a six-point suspension system that conforms to the shape of the operator’s head for maximum comfort. The STRATO is a remarkably lightweight and comfortable helmet due to its dual inner foam construction. The liner incorporates an EPP (expanded polypropylene) and EPS (expanded polystyrene) foam to reduce weight and achieve superb shock absorption. Both helmets are ANSI compliant with rated chinstraps. 

Iridium Communications Inc. and partner Icom Inc. have launched the commercial availability of the world’s first dedicated satellite push-to-talk (PTT) radio. The Icom IC-SAT100 is the only Iridium PTT capable Land-Mobile Radio (LMR) offering real-time communications at the push of a button between groups of individuals, each of whom can be anywhere on the planet. This combined product and service offering provides critical communications beyond the range of trunked radio networks and as an emergency back-up, providing business continuity and security for customers around the world. The Icom IC-SAT100 can interoperate with existing LMR networks and be managed over the air through the Iridium PTT Command Center, simplifying device administration. 

PrecisionHawk Inc., a provider of drone technology for the enterprise, has released PrecisionAnalytics Energy, a complete aerial mapping, modeling, and inspection platform that uses the latest generation of artificial intelligence and machine intelligence to automate analysis of its aerial data. For inspection of utility towers, PrecisionAnalytics’ customers can reduce costs up to 80% and dramatically improve safety in the field. With PrecisionAnalytics Transmission, utilities can replace dangerous helicopter inspections, reducing inspection costs by up to 28%, and gain unprecedented insight into the condition of assets. The platform applies machine vision to identify areas of concern such as cracked insulators, corrosion or structural issues, and aggregates collected data to provide infrastructure statistics, vegetation maps, detailed views and historical record keeping.  

Air Systems International introduces two new 12” certified explosion-proof axial fans, model numbers CVF-12EXP and CVF-12EX22, to the Air Systems’ ventilation line. The rugged, lightweight conductive polyethylene fan is designed to accommodate a variety of applications as well as demanding job site conditions in hazardous locations at an economical price. The CVF-12EXP 12” axial fan is CSA C/US certified for electrical outdoor use in all weather. Features include a 115 VAC, 1.5 HP, 60 Hz, 1 phase, 25-foot power cord, sealed on/off switch and features 5 anti-static fan blades and 25-foot power cord. The fan weighs in at 52 lbs (23.6 Kg). An optional 220 VAC, 50/60 Hz model, CVF-12EX22, is also available and features ATEX/IECEx approvals. 

Emerson is now offering four new models of Greenlee battery hydraulic crimpers and cutters: The In-Line Quad Point Indenter (EK6ATILX, EK6FTILX), the 6-Ton Underground Indenting Crimper (EK6IDCLX), the In-Line ACSR and Guy Wire Cutter (ESC25LX). The new Next Generation Gator tools have a single trigger activation, an enclosed impact-resistant housing to protect the tool from debris and an over-molded grip for easy, comfortable handling and control. They are powered by an 18-volt lithium-ion 4.0 Ah Makita® battery platform, which enables users to accomplish more cuts and crimps per charge, and are equipped with an OLED screen to show instantaneous tool performance when needed.  

Pengo’s new patented End of Stick (EOS) auger drive mount is fully adjustable to fit multiple excavator makes and models. The EOS mount is available in two models, 8K and 16K. Features include: adjustable ear widths 3.5”–8” (8K model) and 4.5”–17” (16K model); locking hardware adjustment that takes only minutes; and removable bushings that make adapting to multiple OEM pins simple. The EOS-8K mount is designed for drive units developing 8,000 ft/lbs of torque, and the EOS-16K mount is designed for drive units developing 16,000 ft/lbs of torque. 

The WattNode® Module for Modbus® from Continental Control Systems is a kilowatt hour (kWh) energy and power meter with ANSI C12.1 and ANSI C12.20 class 0.5 accuracy. Designed for easy customization for nearly any application or type of equipment, the WattNode Module provides bidirectional energy and power readings via an RS-485 port using Modbus RTU communications. The WND-M1-MB meter measures 1, 2, or 3 phases, in delta or wye services, from 120 to 600 VAC. It is packaged in a compact, DIN-rail mount enclosure. Current transformers are available in various opening sizes with ratings from 5 to 6,000 amps. The Module is instrument powered from 6 to 24 VDC or from an isolated 12 to 24 VAC control transformer. The optional MDR-10-12 DIN Rail Power Supply can power up to 12 WND-M1-MB meters. 

Nightstick debuts its newest 1,000 lumen LED Rechargeable Area/Scene Light (XPR-5592GX) and full kit that includes a durable case and 6’ tripod (XPR-5592GCX). This lightweight (4.25 lbs), low-profile Scene Light generates 1,000 lumens, providing up to 17 hours of continuous light on a single charge with its Li-ion battery. With portability in mind, the XPR-5592GX also features a powerful rare-earth magnet in the supporting base for convenient hands-free use. 

2.7mm/3.0mm Road Crash Barrier

Platinum Tools, a solutions provider for the preparation, installation, hand termination and testing of wire and cable, has launched its new Keystone Cat6A Jacks (p/ns 751-1 shielded / 752-1 non-shielded). The new Keystone Cat6A Jack’s tool-less design reduces tool cost, since no punch down tool is required. The color-coded wire guide ensures pairs stay in the proper order for fast, easy terminations. This keystone jack is also designed to be reusable, and comes in multiple colors, so it can be used to replace old, worn out jacks or be integrated into newer projects with little difficulty. The shielded and unshielded tool-less design is made to fit industry standard wall plates and unloaded patch panels while meeting Cat6A channel performance up to 100 m. 

UTILCO announces an addition to its battery-powered in-line cutting tool offering. The BLL-26ACSR-IS features a 350° rotatable scissor head design with heavy-duty blades that cuts up to 3/8” EHS Guy Wire and 556 ACSR. Blade inserts make for easy field replacement. A DataTrack/USB interface captures output performance and data. The tool is backed by a 5-year UTILPro warranty.  

Sound Fence, Noise Barrier, Barrier Panel, Highway Walls, Sound Barrier - Jinbiao,